HUNT Enduro Wide MTB 29 Wheelset

2105g Width int size
F33 / R31 mm 29"

Lab-tested, FEA-developed and race-proven alloy enduro wheelset.

Raced throughout the 2023 EDR season under Joe Connell. Featuring an internally reinforced 31mm rear rim and 33mm wide front rim. Oversided 17mm alloy axles and dual sealed REVO bearings.

Tyre size: Optimized for 2.35" to 2.6" tyres; work well with 2.3" up to 3.0" tyres.

Also available in 27.5" and Mullet.

OFFROAD.CC 4.5/5 STAR REVIEW

With neat touches to the rim width and spoke count, they manage to balance strength and weight very well, while retaining a fast and comfortable ride feel.

Limited Stock. Available Now.
29" (6-Bolt) / Boost - Limited Stock
29" (6-Bolt) / Super-Boost - Limited StockItems are selected to ship from us in the week stated. Delivery time is 3-7 days*

We will ask for axle info after checkout.

Order ETA 3-7 days*
Our wheels are in high demand, don't miss out. Order now.

*If shown in stock

The Purpose _

The Purpose _

After almost three years of valiant service on local trails and EWS stages alike, with numerous awards and accolades along the way, the restless design team here at HUNT saw an opportunity to update the Enduro Wide wheelset to meet the evolving demands of today’s riders. Listening to our athletes on the EWS circuit, we developed a testing protocol to ensure the Enduro Wide can take a beating on the most unforgiving trails without flinching.

Our engineers built an impact test rig specifically for the task, then using FEA (Finite Element Analysis) they optimised the material distribution ensuring the strongest rim without incurring a weight penalty. To better suit the differing needs of each wheel, a front (33mm int.) and rear (31mm int.) specific profile is utilised; designed for compliancy and grip up front, while the back is reinforced to handle high impacts.

So, whether you're riding tracks with black diamonds marked at the trail head or spend the weekends chasing your next Enduro stage, the EnduroWide has your back.

Full Specs _

Rims
Mixed 33/31mm internal width. 6069-T6 heat-treated aluminium alloy (+69% tensile strength vs 6061-T6). Tubeless-ready – designed to work excellently with tubeless tyres. Tubeless-rim tape and valves included. H-lock bead-seat up-kicks for easy and secure tubeless installation. Matt black work-hardened shot-peened finish with laser etched graphics for superior durability.
  • Mixed 33/31mm internal width.
  • 6069-T6 heat-treated aluminium alloy (+69% tensile strength vs 6061-T6).
  • Tubeless-ready – designed to work excellently with tubeless tyres. Tubeless-rim tape and valves included.
  • H-lock bead-seat up-kicks for easy and secure tubeless installation.
  • Matt black work-hardened shot-peened finish with laser etched graphics for superior durability.
Spokes
J-bend cold drawn. 28F/32R spoke count, 3 cross. Made from high grade T302 (18/10) stainless steel wire by Sandvik Sweden. Triple butted 2.0-1.8-2.0 (then 2.2 at the head for the patented Pillar Spoke Re-enforcement). Black stainless treatment.
  • J-bend cold drawn.
  • 28F/32R spoke count, 3 cross.
  • Made from high grade T302 (18/10) stainless steel wire by Sandvik Sweden.
  • Triple butted 2.0-1.8-2.0 (then 2.2 at the head for the patented Pillar Spoke Re-enforcement).
  • Black stainless treatment.
Nipples
Hard-anodized alloy strength. Square body for external adjustment and hex head for easy internal adjustment/tensioning. Long 14mm thread for durability. 14 gauge. Black finish
  • Hard-anodized alloy strength.
  • Square body for external adjustment and hex head for easy internal adjustment/tensioning.
  • Long 14mm thread for durability.
  • 14 gauge.
  • Black finish
Front Hub
Oversized hub and axles. Forged and CNC’d 7075-T6 heat treated aluminium alloy body. 110x15mm spacing. Rock Shox Torque Caps for Boost option available - just add a comment in the notes section on the cart page. Oversized 17mm 7075-T6 aluminium alloy axles. 6 bolt disc mount. Polished anodized black finish with laser graphics.
  • Oversized hub and axles.
  • Forged and CNC’d 7075-T6 heat treated aluminium alloy body.
  • 110x15mm spacing. Rock Shox Torque Caps for Boost option available - just add a comment in the notes section on the cart page.
  • Oversized 17mm 7075-T6 aluminium alloy axles.
  • 6 bolt disc mount.
  • Polished anodized black finish with laser graphics.
Rear Hub
Forged and CNC’d 7075-T6 heat treated aluminium alloy Hub body. RapidEngage 5 degree, 3x2 freehub for increased resistance to the extra torque generated. 148x12mm spacing (boost) or 157x12mm (Super-Boost) 6 bolt disc mount All freehub standards accounted for. Polished anodized black finish with laser graphics.
  • Forged and CNC’d 7075-T6 heat treated aluminium alloy Hub body.
  • RapidEngage 5 degree, 3x2 freehub for increased resistance to the extra torque generated.
  • 148x12mm spacing (boost) or 157x12mm (Super-Boost)
  • 6 bolt disc mount
  • All freehub standards accounted for.
  • Polished anodized black finish with laser graphics.
Bearings
Precision sealed cartridge replaceable units. Large diameter ball bearings for extra durability. Dual full-contact rubber seals.
  • Precision sealed cartridge replaceable units.
  • Large diameter ball bearings for extra durability.
  • Dual full-contact rubber seals.
Tyres Info
HUNT recommends a 2.6"-2.85" tyre for best performance, tyre widths between 2.3" and 3.3" are also safe to use.   Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here.  Tubeless-ready for lower weight and rolling resistance.  You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.  
  • HUNT recommends a 2.6"-2.85" tyre for best performance, tyre widths between 2.3" and 3.3" are also safe to use.  
  • Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here. 
  • Tubeless-ready for lower weight and rolling resistance. 
  • You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.  
Axle Sizes
148x12mm Boost and 157x12mm Super-Boost (Rear) and 110x15mm Boost (Front) standard. Rock Shox Torque Caps available - just add a comment in the notes section on the cart page. *Shimano Microspline & Campagnolo CN3W is only available in 12x142mm
  • 148x12mm Boost and 157x12mm Super-Boost (Rear) and 110x15mm Boost (Front) standard. Rock Shox Torque Caps available - just add a comment in the notes section on the cart page.

*Shimano Microspline & Campagnolo CN3W is only available in 12x142mm

HIGH SPECIFICATION COMPONENTS _

Rims

Re-designed from the ground up so your wheels are the least of your worries as you focus on the stage ahead. Offering up mixed rim widths (33/31mm internal) to handle the different tasks front and rear wheels face. The EnduroWide rim provides support to the tyre during hard cornering or hucking off that step-down you've been eying off for a few months!

Front Hub

We have gone all out on the front hub and beefed it up over our XCWide and TrailWide wheelsets. Featuring an oversized shell to accommodate larger and extremely durable bearings and 7075-T6 series alloy axles to increase stiffness. These hubs have been selected based on their ability to perform on the most aggressive trails.

Rear Hub

The demands of modern day Enduro riding are tougher than ever before, so the EnduroWide hubs have been designed with oversized 17mm axles to increase stiffness and bearing durability. On the rear, the Hunt RapidEngage MTB hubs with a fast 5 degree engagement, means you will be able to put the power down straight out of the corners.

Freehub Body

Choose between SRAM/Shimano 8/9/10/11sp, Shimano Microspline or SRAM XD to be fitted to your Enduro Wides.

Spokes

We have chosen top of the line, triple butted Pillar Spokes with increased reinforcement at the spoke head. Not only are these spokes extremely lightweight, they are also able to provide a greater degree of elasticity when put under increased stress. The Pillar Spoke Reinforcement (PSR) puts more material at the spoke head, just before the J-Bend to prevent failure in this stress area.

Weight

Mountain bikers aren't concerned about weight, right? Nope! Whether you're doing a back-country epic or pedalling between stages, we have paid attention to weight to suit the type of riding they will be subjected too. For example, using the highest specification Pillar triple butted spokes with PSR (Pillar Spoke Re-enforcement) has allowed us to not only create a stronger wheel with a higher spoke count, but one which does not add a weight penalty.

What's in the box _

  • Black Shield PET high tensile strength tubeless tape fitted to wheels.
  • Freehub fitted
  • 45mm Tubeless Valves
  • Spare of each spoke plus nipples
  • Quality control card signed by your wheel builder

<h1>In the Box</h1><ul><li>Black Shield PET high tensile strength tubeless tape fitted to wheels.</li><li>Freehub fitted</li><li>Tubeless Valves</li><li>Spare of each spoke plus nipples</li><li>Quality control card signed by your wheel builder</li></ul>

WARRANTY_

A full 3 years from purchase date warranty is offered to the original purchaser only on all HUNT wheels against material or workmanship defects, please click here to read full details.

Stated wheel weights: Our stated wheel weights reflect the wheelset only; without rim tape, tubeless valves or disc brake lock rings, as is industry standard. A 3% variance (lower or higher) in total system weight is normal for wheelset manufacturing.

All HUNT wheels models have to pass our harsh rolling-drum fatigue tests for rider weight limits, please see here for more details. Max system weight 135 kg (system weight – total weight of fully kitted up rider, bike and luggage). If the system is over 125 kg then an experienced bike mechanic should check the wheel regularly.

We've got your back

Rider Experience Support

Unmatched rider support, 7 days a week. For quick and immediate access to all the help you need, try our Live Chat. Our team consists of real bike riders who are fully equipped to answer any questions and help out. See Contact Us page for more details.

Spares Available

Any spares for our wheelsets can be found on our website. If you assistance, you can find them here.

3-Year Warranty

We are riders ourselves and will do everything we can to get you back on the road and are here to support you. We offer a comprehensive 3-year warranty on all HUNT wheels including free returns if wheels need to be inspected. Goods found to have faults outside of normal wear and tear will be repaired or replaced (subject to stock availability).

60 Day Ride and Return

We are so confident that you'll be happy with you HUNT wheels that we offer a full 60 day to ride them & return for a full refund (or product swap). Click here to learn more.

ABOUT HUNT _

Hunt Bike Wheels are a team of talented, passionate riders with a wealth of industry experience, and set out to bring you the latest, most practical, forward-thinking technology in all things round.

Our mission is to serve devoted riders with the highest performing products, backed by best-in-class rider support.

All of our wheels are built and finished by hand, inclusive of a full quality control inspection.