Hunt E_Enduro Wide E-MTB 29 Single Wheel

<h1>Front Hub</h1><i>We have gone all out on the front hub and beefed it up over standard Enduro wheelsets. These hubs have been selected based on their ability to perform on the most aggressive trails with oversized 17mm 7075-T6 axles for increased stiffness and Heatsinks built into the 6-bolt rotor mount helps to dissipate heat away from the hub and brake system.</i>

<h1>Freehub Body</h1><i>Choose between a SRAM/Shimano 8/9/10/11, Shimano Microspline or SRAM XD to be fitted to your E_Enduro Wide Wheels. Each freehub features a 6x1 pawl set up for increased resistance from the extra torque and engagement in the worst of conditions</i>

<h1>Rear Hub</h1><i>The demands of modern day Enduro riding are tougher than ever before. The E_EnduroWide hubs have been developed specifically for these demands; 10 degrees of engagement is delivered by a 6x1 pawl set up for increased resistance from the extra torque. Heatsinks built into the 6-bolt rotor mount helps to dissapate heat away from the hub and brake system. Oversized 17mm 7075-T6 series alloy increase stiffness.</i>

<h1>Spokes</h1><i>We have chosen top of the line, triple butted Pillar Spokes with increased reinforcement at the spoke head. Not only are these spokes extremely lightweight, they are also able to provide a greater degree of elasticity when put under increased stress. The Pillar Spoke Reinforcement (PSR) puts more material at the spoke head, just before the J-Bend to prevent failure in this stress area.</i>

<h1>A 'Wheel System' Approach</h1><i>Much like your drive chain or suspension, we see a wheelset to be a system of the bicycle in itself. How we chose to go about designing the ride quality, durability and serviceability were our main priorities - Like it should always be.</i>

60% off

Hunt E_Enduro Wide E-MTB 29 Single Wheel

Width int	size
37 mm	29"

Developed for full-power, E-Enduro bikes for hard-hitting terrain and adventures. Wide 37mm alloy rims offer optimal tyre shape for enhanced braking performance and traction. 25% thicker alloy construction and 41% more material at the rim bed for incredible durability.

Tyre size: Optimized for 2.5" to 3.0" tyres; work well with 2.3" up to 3.2" tyres.

Option

Freehub

Spacing

£123.60 GBP £309.00

60% off

Limited Stock

We will ask for axle info after checkout.

More details

The Purpose.

More powerful and able to carry greater momentum, E-bikes place a huge amount of strain on wheels. The E_Enduro wheelset has been developed from the ground up to handle these unique demands. Featuring a 37mm wide 6069-T6 rim, laced with thick triple-butted spokes to oversized E-Specific hubs; the E_Enduro is up for anything you can throw at it, making them an ideal upgrade over your standard Original Equipment set. Developed closely with Elite level racer Oli McKenna, the E_Enduro wheels have been tested to the same rigorous standards as our Downhill rated wheels. The rim sidewall tapers to be 25% thicker and with up to 41% more material in the rim bed compared to our Enduro Wide, they're ready for whatever the trail springs at you. Gone are the days of E-bikes just for commuting, modern E-MTB's can take on the steep & loose just like their 'acoustic' siblings. Whether you use it as a training tool, to fit more runs in between daily duties, or you simply don't like climbing - E-bikes are a great way to get in more vertical.

Key Features.

Rims

6069 T6 welded construction, 37mm wide (internal), work-hardened shot-peened finish. Internal tubeless profile designed in conjunction with engineers at leading MTB tyres brands for the best tubeless seal.

Hubs

Large body E_MTB specific hubs with heatsinks for heat dissipation. 6x1 Pawls for increased resistance to the extra torque generated. Boost (110/148 ) spacing hubs. Large double sealed cartridge bearings. Rock Shox Torque Caps available. Hubs have 6 bolt disc mounts.

Spokes

32F/36R Spoke Count, Thicker Triple Butted (2.3-1.8-2.0) PSR reinforced Pillar Spokes compared to the normal (2.2-1.6-2.0)

Technology.

Full Specs.

Rims

37mm internal width ideal for 2.85" to 3.0" tyre widths, but also work very well with 2.6" up to 3.3". 6069-T6 heat-treated aluminium alloy (+69% tensile strength vs 6061-T6). Tubeless-ready – designed to work excellently with tubeless tyres. Tubeless-rim tape and valves included. H-lock bead-seat up-kicks for easy and secure tubeless installation. Matt black work-hardened shot-peened finish with laser etched graphics for superior durability.

37mm internal width ideal for 2.85" to 3.0" tyre widths, but also work very well with 2.6" up to 3.3".
6069-T6 heat-treated aluminium alloy (+69% tensile strength vs 6061-T6).
Tubeless-ready – designed to work excellently with tubeless tyres. Tubeless-rim tape and valves included.
H-lock bead-seat up-kicks for easy and secure tubeless installation.
Matt black work-hardened shot-peened finish with laser etched graphics for superior durability.

Spokes

J-bend cold drawn. 32F/36R spoke count. Made from high grade T302 (18/10) stainless steel wire by Sandvik Sweden. Thicker Triple butted 2.3-1.8-2.0 (then 2.2 at the head for the patented Pillar Spoke Re-enforcement). Black stainless treatment.

J-bend cold drawn.
32F/36R spoke count.
Made from high grade T302 (18/10) stainless steel wire by Sandvik Sweden.
Thicker Triple butted 2.3-1.8-2.0 (then 2.2 at the head for the patented Pillar Spoke Re-enforcement).
Black stainless treatment.

Nipples

Hard-anodized alloy strength. Square body for external adjustment and hex head for easy internal adjustment/tensioning. Long 14mm thread for durability. 14 gauge. Black finish

Hard-anodized alloy strength.
Square body for external adjustment and hex head for easy internal adjustment/tensioning.
Long 14mm thread for durability.
14 gauge.
Black finish

Rear Hub

Forged and CNC’d 6061-T6 heat treated aluminium alloy Hub body. 10 degree, 6x1 freehub for increased resistance to the extra torque generated 148x12mm spacing. Steel Shimano HG freehub body to avoid the cassette digging in under power. All freehub standards accounted for. 6 bolt disc mount with Heatsinks to help dissipate heat away from the hub and rotors. Polished anodized black finish with laser graphics.

Forged and CNC’d 6061-T6 heat treated aluminium alloy Hub body.
10 degree, 6x1 freehub for increased resistance to the extra torque generated
148x12mm spacing.
Steel Shimano HG freehub body to avoid the cassette digging in under power.
All freehub standards accounted for.
6 bolt disc mount with Heatsinks to help dissipate heat away from the hub and rotors.
Polished anodized black finish with laser graphics.

Bearings

Precision sealed cartridge replaceable units. Large diameter ball bearings for extra durability. Dual full-contact rubber seals.

Precision sealed cartridge replaceable units.
Large diameter ball bearings for extra durability.
Dual full-contact rubber seals.

Tyres Info

HUNT recommends a 2.85"-3.0" tyre for best performance, tyre widths between 2.6" and 3.3" are also safe to use. Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here. Tubeless-ready for lower weight and rolling resistance. You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.

HUNT recommends a 2.85"-3.0" tyre for best performance, tyre widths between 2.6" and 3.3" are also safe to use.
Note: best performance is usually gained by using tyre pressures lower than the maximum, you can see our blog post about this, read here.
Tubeless-ready for lower weight and rolling resistance.
You must not exceed the maximum tyre pressure limits set out in the table below or the maximum limit set by your tyre manufacturer if this is lower.

Axle Sizes

148x12mm Boost (Rear) and 110x15mm Boost (Front) standard. Rock Shox Torque Caps available - just add a comment in the notes section on the cart page. SRAM/Shimano 8/9/10/11 speed, Shimano Microspline and SRAM XD compatible. *Shimano Microspline & Campagnolo CN3W is only available in 12x142mm

148x12mm Boost (Rear) and 110x15mm Boost (Front) standard. Rock Shox Torque Caps available - just add a comment in the notes section on the cart page.
SRAM/Shimano 8/9/10/11 speed, Shimano Microspline and SRAM XD compatible.

*Shimano Microspline & Campagnolo CN3W is only available in 12x142mm

High Specification Components.

Rims

The E_Enduro Wide rim includes details which are high on the durability factor to make sure you finish every ride or stage. The E_Enduro Wide rim provides support to the tyre during hard cornering or hucking off that step-down you've been eying off for a few months!

Rim Profile

Like all of our wheels, the Hunt MTB line-up is designed to be used as a tubeless system. Featuring a H-Lock rim bead with 'up-kicks' to the shoulders of the rim bed secures your tyre when seated. This prevents side-to-side movement reducing the chance of burping your tyre. It creates a great rim-well seal for first installation and easy sealing of tubeless tyres. Still haven't made the switch? All our wheels are tube compatible as well.

Spokes

We have chosen top of the line, triple butted Pillar Spokes with increased reinforcement at the spoke head. Not only are these spokes extremely lightweight, they are also able to provide a greater degree of elasticity when put under increased stress. The Pillar Spoke Reinforcement (PSR) puts more material at the spoke head, just before the J-Bend to prevent failure in this stress area.

Rear Hub

The demands of modern day Enduro riding are tougher than ever before. The E_EnduroWide hubs have been developed specifically for these demands; 10 degrees of engagement is delivered by a 6x1 pawl set up for increased resistance from the extra torque. Heatsinks built into the 6-bolt rotor mount helps to dissapate heat away from the hub and brake system. Oversized 17mm 7075-T6 series alloy increase stiffness.

Weight

Mountain bikers aren't concerned about weight, right? Nope! Whether you're doing a back-country epic or pedalling between stages, we have paid attention to weight to suit the type of riding they will be subjected too. For example, using the highest specification Pillar triple butted spokes with PSR (Pillar Spoke Re-enforcement) has allowed us to not only create a stronger wheel with a higher spoke count, but one which does not add a weight penalty.

What's in the box.

Warranty.

A full 3 years from purchase date warranty is offered to the original purchaser only on all Hunt bike wheels against material or workmanship defects, please click here to read full details.

All HUNT wheels models have to pass our harsh rolling-drum fatigue tests for rider weight limits, please see here for more details. Max system weight 135 kg (system weight total weight of fully kitted up rider, bike and luggage). If the system is over 125 kg then an experienced bike mechanic should check the wheel regularly.

Spares.

To see spares for the current version of these wheels, please click the button below.

Alternatively, please use our Spares Finder to find parts for all our wheels, or contact us via Live Chat.

Spares finder

We've got your back.

Rider Experience Support

Unmatched rider support, 7 days a week. For quick and immediate access to all the help you need, try our Live Chat. Our team consists of real bike riders who are fully equipped to answer any questions and help out. See Contact Us page for more details.

Spares Available

Any spares for our wheelsets can be found on our website. If you assistance, you can find them here.

3-Year Warranty

We are riders ourselves and will do everything we can to get you back on the road and are here to support you. We offer a comprehensive 3-year warranty on all HUNT wheels including free returns if wheels need to be inspected. Goods found to have faults outside of normal wear and tear will be repaired or replaced (subject to stock availability).

60 Day Ride and Return

We are so confident that you'll be happy with you HUNT wheels that we offer a full 60 day to ride them & return for a full refund (or product swap). Click here to learn more.